电气设备调试送电方案
一、工作程序 :
二、Adjustment & Test 电气设备调整试验:
1. Single adjustment&testing 电气设备的单体试验:
1) Calibrate and test the meter and component by adding a voltage/current signal. Check the ratio of CT &
PT. 通入电压电流信号, 用高精度仪器监测校验计量仪表及元器件。 如电流表、 电压表、有功表、
无功表的精度,是否超出规定的误差范围,调整使其符合要求。检查电流互感器、电压互感器、
变压器的变比。
2) Set the volue of relay by adding a voltage/current signal. Check control relay, output relay, measu